Burger Motorsports

Fuel-It! 2018+ KIA Stinger/Genesis G70 3.3L High Pressure Fuel Pump (HPFP) Upgrade

Fuel-It! 2018+ KIA Stinger/Genesis G70 3.3L High Pressure Fuel Pump (HPFP) Upgrade
Fuel-It! 2018+ KIA Stinger/Genesis G70 3.3L High Pressure Fuel Pump (HPFP) Upgrade
Fuel-It! 2018+ KIA Stinger/Genesis G70 3.3L High Pressure Fuel Pump (HPFP) Upgrade
Fuel-It! 2018+ KIA Stinger/Genesis G70 3.3L High Pressure Fuel Pump (HPFP) Upgrade
Fuel-It! 2018+ KIA Stinger/Genesis G70 3.3L High Pressure Fuel Pump (HPFP) Upgrade
Fuel-It! 2018+ KIA Stinger/Genesis G70 3.3L High Pressure Fuel Pump (HPFP) Upgrade
$999.00 In Stock Sold out
Choose Kit
Notify when available
  • Description
  • Shipping and Refund
  • Reviews
This new KIA Stinger/Genesis G70 3.3L high pressure pump upgrade is a direct replacement for your factory high pressure pump offering over 80% more fuel flow capacity! Perfect for those looking to run heavy E85 mixtures without having to add on WMI or CPI.

Includes all required installation hardware for a clean plug and play install in your 2018+ KIA Stinger/Genesis G70 3.3L. Note due to low supply of our Stage2 pumps we've also added a lower cost Stage1 option. The Stage1 pump flows around 20% better than factory and should allow E50 use up to 21psi when combined with our back end flash map. Stage1 is unlikely to be able to support full E85.


What is the difference between this pump and CPI?

Both CPI and the upgraded high pressure pump are meant to address the same issue, high fuel pressure dropping under higher boost levels on E85 mixtures. Without CPI on E40 fuel you're limited to around JB4 map3 or map4 boost levels (~18psi) before fuel pressure drops out. With this pump you'll be able to run JB4 map5 boost levels and above (~21psi) on E40 with the factory flash.

CPI is generally less expensive but a little more involved to install and requires an 1/8" NPT bung to mount the nozzle. CPI requires a JB4 to control it. CPI may require some JB4 setting tweaks to get the right fuel volume for your specific car and situation. The high pressure pump is more of an install and forget it type solution with the main tradeoff being the higher cost.

Can I run straight E85 with this pump?

The pump itself is the same pump used in our BMW B58 Stage2 fuel pump kit which supports well over 600whp on straight E85. But running heavier ethanol mixtures requires tuning changes in addition to the fuel pump. While up to around E50 is relatively easy to dial in as you increase the E85 mixture certain changes to the fuel scalars, AFR mapping, spark dwell, cranking tables, ignition advance, and others are required for the car to operate properly. For JB4 customers these changes are addressed in our JB4 back end flash maps loaded via the EK1.

Vehicle Fitment 

• 2018-Present KIA Stinger GT, GT1, GT2 3.3L V6
• 2018-Present Genesis G70 3.3L V6
Does not fit 2.0L 4 cylinder models.

The basic kit includes

• (1) Upgraded High-Pressure Fuel Pump (HPFP)
• (1) Billet Adapter Plate
• (1) Low-pressure Line (Triple lined crimped fittings PTFE/SS/Nylon Braided)
• (1) Custom wiring harness
• (2) M6 x 1 x 50 fuel pump screws
• (2) M6 x 1 x 20 adapter plate screws
• (1) Super Lube®


Fuel It KIA Stinger 3.5L High Pressure Fuel Pump HPFP Upgrade

We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.

To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need proof of purchase.

To start a return, you can contact us at palenonracing@gmail.com. If your return is accepted, we’ll send you instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.

You can always contact us for any return question at palenonracing@gmail.com.

Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.

Exceptions / non-returnable items
Certain types of items cannot be returned, Burger Motorsports does not allow returns, custom products (such as special orders or personalized items), and air filters can not be returned. We also do not accept returns for hazardous materials, flammable liquids, or gases. Please get in touch if you have questions or concerns about your specific item.

Unfortunately, we cannot accept returns on sale items or gift cards.

The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.

We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. Certain circumstances will require a restocking fee of up to 25% at the discretion of Palenon Performance. (Examples of these circumstances include but are not limited to multiple failed delivery attempts, modified or damaged products and packaging, etc.) If approved, you’ll be automatically refunded on your original payment method. Please remember it can take some time for your bank or credit card company to process and post the refund too.


If the item is shipping from us direct, you will receive a tracking number within 1 business day. Most orders fulfilled at our warehouse will ship the same business day if ordered by 12pm MST. If the item is being drop shipped from the manufacturer, we cannot guarantee a tracking number within 1 business day. If an item is being drop shipped, we cannot guarantee the 24 hour (1 business day) processing time. A purchase of expedited shipping at checkout means that once item is ready to ship, it will ship using the upgraded shipping method. Some manufacturers require 3-5 days to process orders. Purchasing expedited shipping may speed up the processing time of your order, but we cannot make any guarantees in relation to faster processing time on the manufacturer’s end.


If you used a credit/debit card or PayPal to place an order and decide to cancel or return your order for any reason, a 5% merchant fee will be passed along to you (8% for Shop Pay installments). Some manufacturers can take up to 7 business days to ship out orders. If an item is out of stock we will reach out to you within 48 hours to confirm you would like to proceed with a preorder. If the item is listed as custom-built/ built to order within the description, or if the ETA or average lead time is visible on the product page at the time of ordering and you are cancelling inside of that ETA/lead time you will be charged the merchant fee. If the cancellation is outside of the time frame the merchant fee will not be charged to you for canceling. 

Recently Viewed