- Description
- Reviews
- Shipping and Refund
The Burger Motorsports billet aluminum B58 oil filter cover directly replaces your weak OE plastic cap for greater protection, ease of removal/install, and great looks under the hood. You can use a 3/8" inch drive ratchet or torque wrench to install and remove. The built-in 32mm hex head does not require a special removal/install tool like the factory cap. Uses the OE oil filter, filter housing o-ring, and filter insert. Anodized for protection. This quality part is a must for any serious BMW owner.
Upgrade your weak stock plastic B58 oil filter housing cap
SALE!! SAVE $20.00 Clearing out V1 B58 caps to make room for the V2 magnetic caps! While Supplies Last.
Optional Magnetic Version: Equipped with an integrated Samarium Cobalt magnet to capture dangerous metal shavings and particles that would otherwise circulate through your engine oil and bearings. Unlike other oil filter caps that press fit smaller magnets leaving them vulnerable to damage and displacement during engine heat cycles, our magnets are secured in their precisely machined pockets to safely withstand extreme temperatures and pressure.
🔧 Install: After removing the OEM oil filter cap, remove the filter and be sure to remove the plastic oil filter bypass valve and transfer it to the new BMS billet oil filter cap (see below install video). Be sure to replace the exterior o-ring gasket also when installing.
Vehicle Fitment (most gen1 and Gen2 B58 Motors)
BMW 1 Series
• 2015+ F20/F21 B58 M140i 3.0L
BMW 2 Series
• 2022+ G42 B58 M240i xDrive
• 2016-2021 F22 F23 B58 M240i/iX 3.0L
BMW 3 Series
• 2020+ G20 B58 M340i/M340iX 3.0L
• 2016-2019 F30 B58 340i/340iX 3.0L
BMW 4 Series
• 2021+ G22 G23 G26 B58 M440i/M440iX/Gran Coupe
• 2016-2020 F32 F33 F36 B58 440i/440iX 3.0L
BMW 5 Series
• 2017+ G30 B58 540i/540iX 3.0L
BMW 6 Series
• 2017+ G32 B58 640i/640iX 3.0L
BMW 7 Series
2016+ G11/G12 B58 740i/740iX 3.0L
BMW 8 Series
2020+ G15/G14/G16 B58 840i/840iX/Gran Coupe 3.0L
BMW X Series
• 2019+ G05 B58 X5 40i/40iX 3.0L
• 2019+ G06 B58 X6 40i 3.0L
• 2019+ G07 B58 X7 40i 3.0L
BMW Z4
• 2019+ BMW G29 B58 Z4 M40i
Toyota
• 2020+ GR Supra Mk5 3.0L 6 cyl.
Features and Benefits
• Solid aluminum design is much stronger than brittle plastic
• Integrated heat sinks for better oil cooling
• Special tools are not required for removal/install like the factory cap
• Strong design won't fail under pressure
• Reuses OE filter insert and o-ring
• Anodized for protection
• Looks great under the hood
• Available in black, red, silver, and blue
• Made in the USA
What is billet?
In this case, A billet is a solid block of aluminum (lightweight metal) with a size larger than the part. Excess material from the billet is removed by precision CNC machining, essentially carving the part out of solid aluminum. CNC machined parts are consistently stronger, better looking, and last longer than cheaper cast and plastic versions.
Please note some engine degreasers and harsh cleaners may fade or damage the anodized finish.
B58 Oil Filter Cap Install
Handling
Orders shipped directly from our warehouse are usually processed the same business day if placed before 12 PM MST, and tracking details are provided within 1 business day.
For drop-shipped items, processing times may vary depending on the manufacturer, typically 3–5 business days. Tracking updates may take longer in such cases.
Expedited shipping applies only once the item is ready to ship.
Return
You have 30 days after receiving your order to request a return. Items must be unused, in original packaging, and include proof of purchase. Customers are responsible for covering the return shipping costs.
To start a return, email us at sales@palenonperformance.com. Returns sent without approval will not be accepted.
You can request a return directly from your account by selecting the return option on your order page. Here is the URL: https://shopify.com/55092379855/account/orders
Non-returnable items:
- Burger Motorsports (BMS) products
- Used items
- Air Intakes
- Hazardous materials, flammable liquids, or gases
- Discounted items and gift cards other than "PALENON PERFORMANCE" brand
Exchanges
Return the item and place a new order once approved.
Refunds
Approved refunds are issued to the original payment method. A restocking fee is 20% will be applied. Processing time depends on your bank or payment provider. The original shipping cost will not be refunded.
Cancellations
Canceled orders are subject to a 5% merchant fee (8% for Shop Pay installments). Custom, specialized items or pre-order items canceled within their lead time are also subject to this fee. Will also incur a 10% restocking fee.
Damaged or incorrect items
Inspect your order upon arrival and contact us immediately for assistance. If the wrong part was ordered, customer covers return shipping.
Disputes / Chargebacks
Our legal team is fully prepared to take stringent action against you for filing a baseless claim and initiating a fraudulent chargeback. This will lead to civil or criminal proceedings, which would require you to engage with our attorneys in our jurisdiction.
It is crucial to understand that filing a false chargeback is a serious offense, punishable by substantial fines or imprisonment. Potential penalties for fraudulent chargebacks can include one to three years in prison and fines ranging from $1,000 to $10,000. We treat all chargebacks with the utmost seriousness, regardless of the amount, as this is classified as a felony.
We will compose all necessary information to send your account to a collections agency and request that you be served once our lawyers organize the evidence and file a case against you.
The Burger Motorsports billet aluminum B58 oil filter cover directly replaces your weak OE plastic cap for greater protection, ease of removal/install, and great looks under the hood. You can use a 3/8" inch drive ratchet or torque wrench to install and remove. The built-in 32mm hex head does not require a special removal/install tool like the factory cap. Uses the OE oil filter, filter housing o-ring, and filter insert. Anodized for protection. This quality part is a must for any serious BMW owner.
Upgrade your weak stock plastic B58 oil filter housing cap
SALE!! SAVE $20.00 Clearing out V1 B58 caps to make room for the V2 magnetic caps! While Supplies Last.
Optional Magnetic Version: Equipped with an integrated Samarium Cobalt magnet to capture dangerous metal shavings and particles that would otherwise circulate through your engine oil and bearings. Unlike other oil filter caps that press fit smaller magnets leaving them vulnerable to damage and displacement during engine heat cycles, our magnets are secured in their precisely machined pockets to safely withstand extreme temperatures and pressure.
🔧 Install: After removing the OEM oil filter cap, remove the filter and be sure to remove the plastic oil filter bypass valve and transfer it to the new BMS billet oil filter cap (see below install video). Be sure to replace the exterior o-ring gasket also when installing.
Vehicle Fitment (most gen1 and Gen2 B58 Motors)
BMW 1 Series
• 2015+ F20/F21 B58 M140i 3.0L
BMW 2 Series
• 2022+ G42 B58 M240i xDrive
• 2016-2021 F22 F23 B58 M240i/iX 3.0L
BMW 3 Series
• 2020+ G20 B58 M340i/M340iX 3.0L
• 2016-2019 F30 B58 340i/340iX 3.0L
BMW 4 Series
• 2021+ G22 G23 G26 B58 M440i/M440iX/Gran Coupe
• 2016-2020 F32 F33 F36 B58 440i/440iX 3.0L
BMW 5 Series
• 2017+ G30 B58 540i/540iX 3.0L
BMW 6 Series
• 2017+ G32 B58 640i/640iX 3.0L
BMW 7 Series
2016+ G11/G12 B58 740i/740iX 3.0L
BMW 8 Series
2020+ G15/G14/G16 B58 840i/840iX/Gran Coupe 3.0L
BMW X Series
• 2019+ G05 B58 X5 40i/40iX 3.0L
• 2019+ G06 B58 X6 40i 3.0L
• 2019+ G07 B58 X7 40i 3.0L
BMW Z4
• 2019+ BMW G29 B58 Z4 M40i
Toyota
• 2020+ GR Supra Mk5 3.0L 6 cyl.
Features and Benefits
• Solid aluminum design is much stronger than brittle plastic
• Integrated heat sinks for better oil cooling
• Special tools are not required for removal/install like the factory cap
• Strong design won't fail under pressure
• Reuses OE filter insert and o-ring
• Anodized for protection
• Looks great under the hood
• Available in black, red, silver, and blue
• Made in the USA
What is billet?
In this case, A billet is a solid block of aluminum (lightweight metal) with a size larger than the part. Excess material from the billet is removed by precision CNC machining, essentially carving the part out of solid aluminum. CNC machined parts are consistently stronger, better looking, and last longer than cheaper cast and plastic versions.
Please note some engine degreasers and harsh cleaners may fade or damage the anodized finish.
B58 Oil Filter Cap Install
Handling
Orders shipped directly from our warehouse are usually processed the same business day if placed before 12 PM MST, and tracking details are provided within 1 business day.
For drop-shipped items, processing times may vary depending on the manufacturer, typically 3–5 business days. Tracking updates may take longer in such cases.
Expedited shipping applies only once the item is ready to ship.
Return
You have 30 days after receiving your order to request a return. Items must be unused, in original packaging, and include proof of purchase. Customers are responsible for covering the return shipping costs.
To start a return, email us at sales@palenonperformance.com. Returns sent without approval will not be accepted.
You can request a return directly from your account by selecting the return option on your order page. Here is the URL: https://shopify.com/55092379855/account/orders
Non-returnable items:
- Burger Motorsports (BMS) products
- Used items
- Air Intakes
- Hazardous materials, flammable liquids, or gases
- Discounted items and gift cards other than "PALENON PERFORMANCE" brand
Exchanges
Return the item and place a new order once approved.
Refunds
Approved refunds are issued to the original payment method. A restocking fee is 20% will be applied. Processing time depends on your bank or payment provider. The original shipping cost will not be refunded.
Cancellations
Canceled orders are subject to a 5% merchant fee (8% for Shop Pay installments). Custom, specialized items or pre-order items canceled within their lead time are also subject to this fee. Will also incur a 10% restocking fee.
Damaged or incorrect items
Inspect your order upon arrival and contact us immediately for assistance. If the wrong part was ordered, customer covers return shipping.
Disputes / Chargebacks
Our legal team is fully prepared to take stringent action against you for filing a baseless claim and initiating a fraudulent chargeback. This will lead to civil or criminal proceedings, which would require you to engage with our attorneys in our jurisdiction.
It is crucial to understand that filing a false chargeback is a serious offense, punishable by substantial fines or imprisonment. Potential penalties for fraudulent chargebacks can include one to three years in prison and fines ranging from $1,000 to $10,000. We treat all chargebacks with the utmost seriousness, regardless of the amount, as this is classified as a felony.
We will compose all necessary information to send your account to a collections agency and request that you be served once our lawyers organize the evidence and file a case against you.
