- Description
- Reviews
- Shipping and Refund
The Burger Motorsports JB4 Port Injection Controller attaches to the JB4 allowing it to directly control both traditional port injection kits and WMI port injection kits.
The AIC6 is a simple stand-alone system that allows mapping of port injection as a function of boost pressure and engine speed.
The JB4 port injection controller is a fully integrated solution allowing enhanced port injection mapping and safety.
For example the JB4 port injection controller:
1) Uses low fuel pressure in conjunction with boost pressure to evaluate injection pressure and adjust PI IPW dynamically as required to maintain consistent flow volume. This becomes particularly important in applications that are at the edge of their low fuel pressure supply. As low pressure drops or oscillates port injection IPW must be dynamically adjusted to avoid run lean conditions.
2) Monitors pedal input, clutch input, gear, throttle position, etc, allowing more advanced mapping and instant cut of PI when letting off the gas or when traction control kicks in to avoid backfires.
3) Monitors AFR in both banks and can cut PI flow in the event a misfire event is detected preventing a potentially lean condition.
4) Monitors current through the injectors and sends a signal back to the JB4 altering it of various problems including a clogged or disconnected injector, blown electrical fuse, loose ground, etc.
5) Monitors fuel trims in each bank and failsafe's in the event of a mismatch of more than 15% indicating a potential boost single cylinder boost leak or injector flow issue.
6) Allows easy user adjustment of overall fuel volume using linear "Fuel Bias 0-100" values by RPM, greatly reducing the typical mapping complications when making manual tuning changes.
7) Integrates into the JB4 multi-map system which produces on-the-fly PI mapping changes when you change maps when boost is reduced in lower gears, or during anti-lag engagement.
8) When equipped with a JB4 integrated flex fuel sensor or JB4 virtual flex fuel sensor can automatically adjust port injection volume based on the E85 mixture allowing for easy mixture changes.
9) Enhanced mapping logic such as tip in supplement to boost port injection during sudden transitions like spool up or gear changes where the high-pressure pump tends to have problems keeping up.
10) Does not require a separate interface and cable for mapping and tuning port injection. It's all done right through the JB4 interface and logs greatly simplifying the process.
11) Includes an extra output to run your second fuel pump OR WMI PUMP (for port injection meth), eliminating the need for an extra Hobbs switch.
Download BMS/Fuel-It! Port injection and Flex Fuel wiring guide!
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need proof of purchase.
To start a return, you can contact us at palenonracing@gmail.com. If your return is accepted, we’ll send you instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
You can always contact us for any return question at palenonracing@gmail.com.
Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.
Exceptions / non-returnable items
Certain types of items cannot be returned, Burger Motorsports does not allow returns, custom products (such as special orders or personalized items), JB4 Tuners and air filters can not be returned. We also do not accept returns for hazardous materials, flammable liquids, or gases. Please get in touch if you have questions or concerns about your specific item.
Unfortunately, we cannot accept returns on sale items or gift cards.
Exchanges
The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.
Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. Certain circumstances will require a restocking fee of up to 25% at the discretion of Palenon Performance. (Examples of these circumstances include but are not limited to multiple failed delivery attempts, modified or damaged products and packaging, etc.) If approved, you’ll be automatically refunded on your original payment method. Please remember it can take some time for your bank or credit card company to process and post the refund too.
Handling
If the item is shipping from us direct, you will receive a tracking number within 1 business day. Most orders fulfilled at our warehouse will ship the same business day if ordered by 12pm MST. If the item is being drop shipped from the manufacturer, we cannot guarantee a tracking number within 1 business day. If an item is being drop shipped, we cannot guarantee the 24 hour (1 business day) processing time. A purchase of expedited shipping at checkout means that once item is ready to ship, it will ship using the upgraded shipping method. Some manufacturers require 3-5 days to process orders. Purchasing expedited shipping may speed up the processing time of your order, but we cannot make any guarantees in relation to faster processing time on the manufacturer’s end.
Cancellations
If you used a credit/debit card or PayPal to place an order and decide to cancel or return your order for any reason, a 5% merchant fee will be passed along to you (8% for Shop Pay installments). Some manufacturers can take up to 7 business days to ship out orders. If an item is out of stock we will reach out to you within 48 hours to confirm you would like to proceed with a preorder. If the item is listed as custom-built/ built to order within the description, or if the ETA or average lead time is visible on the product page at the time of ordering and you are cancelling inside of that ETA/lead time you will be charged the merchant fee. If the cancellation is outside of the time frame the merchant fee will not be charged to you for canceling.
The Burger Motorsports JB4 Port Injection Controller attaches to the JB4 allowing it to directly control both traditional port injection kits and WMI port injection kits.
The AIC6 is a simple stand-alone system that allows mapping of port injection as a function of boost pressure and engine speed.
The JB4 port injection controller is a fully integrated solution allowing enhanced port injection mapping and safety.
For example the JB4 port injection controller:
1) Uses low fuel pressure in conjunction with boost pressure to evaluate injection pressure and adjust PI IPW dynamically as required to maintain consistent flow volume. This becomes particularly important in applications that are at the edge of their low fuel pressure supply. As low pressure drops or oscillates port injection IPW must be dynamically adjusted to avoid run lean conditions.
2) Monitors pedal input, clutch input, gear, throttle position, etc, allowing more advanced mapping and instant cut of PI when letting off the gas or when traction control kicks in to avoid backfires.
3) Monitors AFR in both banks and can cut PI flow in the event a misfire event is detected preventing a potentially lean condition.
4) Monitors current through the injectors and sends a signal back to the JB4 altering it of various problems including a clogged or disconnected injector, blown electrical fuse, loose ground, etc.
5) Monitors fuel trims in each bank and failsafe's in the event of a mismatch of more than 15% indicating a potential boost single cylinder boost leak or injector flow issue.
6) Allows easy user adjustment of overall fuel volume using linear "Fuel Bias 0-100" values by RPM, greatly reducing the typical mapping complications when making manual tuning changes.
7) Integrates into the JB4 multi-map system which produces on-the-fly PI mapping changes when you change maps when boost is reduced in lower gears, or during anti-lag engagement.
8) When equipped with a JB4 integrated flex fuel sensor or JB4 virtual flex fuel sensor can automatically adjust port injection volume based on the E85 mixture allowing for easy mixture changes.
9) Enhanced mapping logic such as tip in supplement to boost port injection during sudden transitions like spool up or gear changes where the high-pressure pump tends to have problems keeping up.
10) Does not require a separate interface and cable for mapping and tuning port injection. It's all done right through the JB4 interface and logs greatly simplifying the process.
11) Includes an extra output to run your second fuel pump OR WMI PUMP (for port injection meth), eliminating the need for an extra Hobbs switch.
Download BMS/Fuel-It! Port injection and Flex Fuel wiring guide!
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need proof of purchase.
To start a return, you can contact us at palenonracing@gmail.com. If your return is accepted, we’ll send you instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
You can always contact us for any return question at palenonracing@gmail.com.
Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.
Exceptions / non-returnable items
Certain types of items cannot be returned, Burger Motorsports does not allow returns, custom products (such as special orders or personalized items), JB4 Tuners and air filters can not be returned. We also do not accept returns for hazardous materials, flammable liquids, or gases. Please get in touch if you have questions or concerns about your specific item.
Unfortunately, we cannot accept returns on sale items or gift cards.
Exchanges
The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.
Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. Certain circumstances will require a restocking fee of up to 25% at the discretion of Palenon Performance. (Examples of these circumstances include but are not limited to multiple failed delivery attempts, modified or damaged products and packaging, etc.) If approved, you’ll be automatically refunded on your original payment method. Please remember it can take some time for your bank or credit card company to process and post the refund too.
Handling
If the item is shipping from us direct, you will receive a tracking number within 1 business day. Most orders fulfilled at our warehouse will ship the same business day if ordered by 12pm MST. If the item is being drop shipped from the manufacturer, we cannot guarantee a tracking number within 1 business day. If an item is being drop shipped, we cannot guarantee the 24 hour (1 business day) processing time. A purchase of expedited shipping at checkout means that once item is ready to ship, it will ship using the upgraded shipping method. Some manufacturers require 3-5 days to process orders. Purchasing expedited shipping may speed up the processing time of your order, but we cannot make any guarantees in relation to faster processing time on the manufacturer’s end.
Cancellations
If you used a credit/debit card or PayPal to place an order and decide to cancel or return your order for any reason, a 5% merchant fee will be passed along to you (8% for Shop Pay installments). Some manufacturers can take up to 7 business days to ship out orders. If an item is out of stock we will reach out to you within 48 hours to confirm you would like to proceed with a preorder. If the item is listed as custom-built/ built to order within the description, or if the ETA or average lead time is visible on the product page at the time of ordering and you are cancelling inside of that ETA/lead time you will be charged the merchant fee. If the cancellation is outside of the time frame the merchant fee will not be charged to you for canceling.
