Kies Motorsports

Kies Motorsports BMW S55/ N55 Engine Crank Seal Guard (F30/ F32 /F80/ F82/ F83/ ETC)

Kies Motorsports BMW S55/ N55 Engine Crank Seal Guard (F30/ F32 /F80/ F82/ F83/ ETC)
-32%
$396.00
$268.00 In Stock Backordered Sold out
Notify when available
  • Description
  • Reviews
  • Shipping and Refund
NOTE: THIS WILL NOT WORK ON E SERIES VEHICLES. THIS ALSO DOES NOT WORK ON N54 MOTORS.
These are precision engineered with tight tolerances, based on factory specs. If you've had your seal replaced due to an engine repair, crank hub upgrade, etc, please ensure that the seal has been properly set and has a minimum depth of 3/8". Compatible with F series N55 and S55 engines.
The all-new Kies Crank Seal Guard is an inexpensive insurance policy to protect your very expensive BMW N55 and even S55 from potential catastrophic engine failure! 

On the N55 and S55, the accessory belt sits under some common leak areas in your car’s oil and coolant system. If you experience one of these leaks, what can happen is your accessory belt can start to walk off your crank pulley. Because of the design of the engine, tiny shards of rubber from your fraying belt can easily find their way through your crank seal. If this happens, these little pieces of the belt can get picked up by your timing chain and find their way into your valve cover and cause damage, and/or they can lodge themselves into your oil pickup, starving your engine of oil. Additionally, we’ve even seen cases where the belts snap, wrap themselves around your crank pulley and force the entire belt into the engine, through the crank seal! If either of these situations is to occur, you’ll be certainly looking at a costly new engine, which will cost thousands of dollars.

After seeing these devastating engine failures, we went to work to design a bulletproof solution to prevent this from happening! The Kies Crank Seal Guard is a precisely engineered piece of art, which acts to block belts and belt particles from making their way through the crank seal, by reducing the gap between the Kies Crank Seal Guard and the crank hub to just twenty thousandths of an inch, saving your engine! The Kies Crank Seal Guard also features self-centering technology, to ensure a perfect fit every single time.

The Kies Crank Seal Guard is machined out of a single piece of 6061 billet aluminum, to eliminate the chance of any welds snapping, it includes BMW Genuine Bolts and it’s proudly made in the USA! 

We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.

To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need proof of purchase.

To start a return, you can contact us at palenonracing@gmail.com. If your return is accepted, we’ll send you instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.

You can always contact us for any return question at palenonracing@gmail.com.


Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.


Exceptions / non-returnable items
Certain types of items cannot be returned, Burger Motorsports does not allow returns, custom products (such as special orders or personalized items), JB4 Tuners and air filters can not be returned. We also do not accept returns for hazardous materials, flammable liquids, or gases. Please get in touch if you have questions or concerns about your specific item.

Unfortunately, we cannot accept returns on sale items or gift cards.


Exchanges
The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.


Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. Certain circumstances will require a restocking fee of up to 25% at the discretion of Palenon Performance. (Examples of these circumstances include but are not limited to multiple failed delivery attempts, modified or damaged products and packaging, etc.) If approved, you’ll be automatically refunded on your original payment method. Please remember it can take some time for your bank or credit card company to process and post the refund too.

Handling

If the item is shipping from us direct, you will receive a tracking number within 1 business day. Most orders fulfilled at our warehouse will ship the same business day if ordered by 12pm MST. If the item is being drop shipped from the manufacturer, we cannot guarantee a tracking number within 1 business day. If an item is being drop shipped, we cannot guarantee the 24 hour (1 business day) processing time. A purchase of expedited shipping at checkout means that once item is ready to ship, it will ship using the upgraded shipping method. Some manufacturers require 3-5 days to process orders. Purchasing expedited shipping may speed up the processing time of your order, but we cannot make any guarantees in relation to faster processing time on the manufacturer’s end.

Cancellations

If you used a credit/debit card or PayPal to place an order and decide to cancel or return your order for any reason, a 5% merchant fee will be passed along to you (8% for Shop Pay installments). Some manufacturers can take up to 7 business days to ship out orders. If an item is out of stock we will reach out to you within 48 hours to confirm you would like to proceed with a preorder. If the item is listed as custom-built/ built to order within the description, or if the ETA or average lead time is visible on the product page at the time of ordering and you are cancelling inside of that ETA/lead time you will be charged the merchant fee. If the cancellation is outside of the time frame the merchant fee will not be charged to you for canceling. 

NOTE: THIS WILL NOT WORK ON E SERIES VEHICLES. THIS ALSO DOES NOT WORK ON N54 MOTORS.
These are precision engineered with tight tolerances, based on factory specs. If you've had your seal replaced due to an engine repair, crank hub upgrade, etc, please ensure that the seal has been properly set and has a minimum depth of 3/8". Compatible with F series N55 and S55 engines.
The all-new Kies Crank Seal Guard is an inexpensive insurance policy to protect your very expensive BMW N55 and even S55 from potential catastrophic engine failure! 

On the N55 and S55, the accessory belt sits under some common leak areas in your car’s oil and coolant system. If you experience one of these leaks, what can happen is your accessory belt can start to walk off your crank pulley. Because of the design of the engine, tiny shards of rubber from your fraying belt can easily find their way through your crank seal. If this happens, these little pieces of the belt can get picked up by your timing chain and find their way into your valve cover and cause damage, and/or they can lodge themselves into your oil pickup, starving your engine of oil. Additionally, we’ve even seen cases where the belts snap, wrap themselves around your crank pulley and force the entire belt into the engine, through the crank seal! If either of these situations is to occur, you’ll be certainly looking at a costly new engine, which will cost thousands of dollars.

After seeing these devastating engine failures, we went to work to design a bulletproof solution to prevent this from happening! The Kies Crank Seal Guard is a precisely engineered piece of art, which acts to block belts and belt particles from making their way through the crank seal, by reducing the gap between the Kies Crank Seal Guard and the crank hub to just twenty thousandths of an inch, saving your engine! The Kies Crank Seal Guard also features self-centering technology, to ensure a perfect fit every single time.

The Kies Crank Seal Guard is machined out of a single piece of 6061 billet aluminum, to eliminate the chance of any welds snapping, it includes BMW Genuine Bolts and it’s proudly made in the USA! 

We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.

To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need proof of purchase.

To start a return, you can contact us at palenonracing@gmail.com. If your return is accepted, we’ll send you instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.

You can always contact us for any return question at palenonracing@gmail.com.


Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.


Exceptions / non-returnable items
Certain types of items cannot be returned, Burger Motorsports does not allow returns, custom products (such as special orders or personalized items), JB4 Tuners and air filters can not be returned. We also do not accept returns for hazardous materials, flammable liquids, or gases. Please get in touch if you have questions or concerns about your specific item.

Unfortunately, we cannot accept returns on sale items or gift cards.


Exchanges
The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.


Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. Certain circumstances will require a restocking fee of up to 25% at the discretion of Palenon Performance. (Examples of these circumstances include but are not limited to multiple failed delivery attempts, modified or damaged products and packaging, etc.) If approved, you’ll be automatically refunded on your original payment method. Please remember it can take some time for your bank or credit card company to process and post the refund too.

Handling

If the item is shipping from us direct, you will receive a tracking number within 1 business day. Most orders fulfilled at our warehouse will ship the same business day if ordered by 12pm MST. If the item is being drop shipped from the manufacturer, we cannot guarantee a tracking number within 1 business day. If an item is being drop shipped, we cannot guarantee the 24 hour (1 business day) processing time. A purchase of expedited shipping at checkout means that once item is ready to ship, it will ship using the upgraded shipping method. Some manufacturers require 3-5 days to process orders. Purchasing expedited shipping may speed up the processing time of your order, but we cannot make any guarantees in relation to faster processing time on the manufacturer’s end.

Cancellations

If you used a credit/debit card or PayPal to place an order and decide to cancel or return your order for any reason, a 5% merchant fee will be passed along to you (8% for Shop Pay installments). Some manufacturers can take up to 7 business days to ship out orders. If an item is out of stock we will reach out to you within 48 hours to confirm you would like to proceed with a preorder. If the item is listed as custom-built/ built to order within the description, or if the ETA or average lead time is visible on the product page at the time of ordering and you are cancelling inside of that ETA/lead time you will be charged the merchant fee. If the cancellation is outside of the time frame the merchant fee will not be charged to you for canceling. 

BMW, Supra, Audi 8V A3 Racing Downpipes
For B58 N63 S55 S63R S58 S63 B48 B46 N55 N54 N20 Engine
slideshow-image

Recently Viewed