- Description
- Reviews
- Shipping and Refund
Deliver consistent, reliable power run after run
The last intercooler you'll ever buy for your car. Good for over 1000whp the BMS 7.5" High-Density RACE intercooler delivers better cooling, more power to the wheels, and allows you to hold that power longer during extended runs. With a larger core and more surface area than stock, your intercooler pressure drop is reduced and cooling dramatically improved. Resulting in peak power gains of 10whp+ and during longer pulls and back to back runs as much as 30whp+ over the heat soak prone factory intercooler.
BMS replacement intercoolers are a direct replacement for your factory intercooler and fully reversible. All required hardware is included. Compatible with both N54 and N55 applications.
The new E chassis RACE core is intended for serious performance applications such as upgraded turbos or single turbo kits, providing absolutely the best cooling capacity available in a high quality and high-value package. Includes an internal hot side flow diverter to ensure consistent flow and cooling throughout even at lower boost pressures. RACE requires minor trimming of the plastic shrouding during installation.
E chassis race FMIC dimensions 7.5" deep x 5.5" x 3" Overall height is 11"
Features and Benefits
- High-flow oversized design
- Larger end tanks
- Larger core size
- Prevents heat soak
- Direct bolt-on factory replacement
E Chassis Intercooler Vehicle Fitment
2010+ models, please see the bottom of the page for the "J-pipe"
BMW 1 Series
• 2007-2010 N54 BMW E82 E87 E88 135i
• 2011 N54 BMW E82 1M
• 2011+ N55 BMW E82 E87 E88 135i
BMW 3 Series
• 2007-2010 N54 BMW E90 E91 335i/335ix
• 2011-2013 N54 E92 335is
• 2011 N55 BMW E90 335i/335ix
• 2011-2013 N55 BMW E92 E93 335i/iX
BMW 5 Series
Requires adapter brackets (Sold Separately)
https://palenonperformance.com/products/535-e-chassis-n54-bmw-intercooler-adapter-brackets
• 2008-2010 E60 Sedan 535i/535ix
• 2008-2010 E61 Touring 535i/535ix
INSTALL VIDEO
DYNO RESULTS
OTHER PHOTOS
RACE Intercooler hot side flow diverter valve to ensure equal distribution through the large core at lower engine speeds
BMS High-Density Core Close Up
Optional E Chassis RACE Intercooler J Pipe (Sold Separately)
The factory J pipe is ~2.4" and in some 2010+ models a one-piece design. The 2.5" J pipe is suggested for models that have the one-piece design while the 3" J pipe allows you to stay 3" all the way from the intercooler to your throttle body when equipped with a 3" BMS charge pipe for the highest flow potential. We suggest the 3" J pipe for vehicles with aftermarket turbos.
Click here to purchase: https://palenonperformance.com/collections/burger-tuning/products/bms-race-intercooler-j-pipe
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need proof of purchase.
To start a return, you can contact us at palenonracing@gmail.com. If your return is accepted, we’ll send you instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
You can always contact us for any return question at palenonracing@gmail.com.
Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.
Exceptions / non-returnable items
Certain types of items cannot be returned, Burger Motorsports does not allow returns, custom products (such as special orders or personalized items), JB4 Tuners and air filters can not be returned. We also do not accept returns for hazardous materials, flammable liquids, or gases. Please get in touch if you have questions or concerns about your specific item.
Unfortunately, we cannot accept returns on sale items or gift cards.
Exchanges
The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.
Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. Certain circumstances will require a restocking fee of up to 25% at the discretion of Palenon Performance. (Examples of these circumstances include but are not limited to multiple failed delivery attempts, modified or damaged products and packaging, etc.) If approved, you’ll be automatically refunded on your original payment method. Please remember it can take some time for your bank or credit card company to process and post the refund too.
Handling
If the item is shipping from us direct, you will receive a tracking number within 1 business day. Most orders fulfilled at our warehouse will ship the same business day if ordered by 12pm MST. If the item is being drop shipped from the manufacturer, we cannot guarantee a tracking number within 1 business day. If an item is being drop shipped, we cannot guarantee the 24 hour (1 business day) processing time. A purchase of expedited shipping at checkout means that once item is ready to ship, it will ship using the upgraded shipping method. Some manufacturers require 3-5 days to process orders. Purchasing expedited shipping may speed up the processing time of your order, but we cannot make any guarantees in relation to faster processing time on the manufacturer’s end.
Cancellations
If you used a credit/debit card or PayPal to place an order and decide to cancel or return your order for any reason, a 5% merchant fee will be passed along to you (8% for Shop Pay installments). Some manufacturers can take up to 7 business days to ship out orders. If an item is out of stock we will reach out to you within 48 hours to confirm you would like to proceed with a preorder. If the item is listed as custom-built/ built to order within the description, or if the ETA or average lead time is visible on the product page at the time of ordering and you are cancelling inside of that ETA/lead time you will be charged the merchant fee. If the cancellation is outside of the time frame the merchant fee will not be charged to you for canceling.
Deliver consistent, reliable power run after run
The last intercooler you'll ever buy for your car. Good for over 1000whp the BMS 7.5" High-Density RACE intercooler delivers better cooling, more power to the wheels, and allows you to hold that power longer during extended runs. With a larger core and more surface area than stock, your intercooler pressure drop is reduced and cooling dramatically improved. Resulting in peak power gains of 10whp+ and during longer pulls and back to back runs as much as 30whp+ over the heat soak prone factory intercooler.
BMS replacement intercoolers are a direct replacement for your factory intercooler and fully reversible. All required hardware is included. Compatible with both N54 and N55 applications.
The new E chassis RACE core is intended for serious performance applications such as upgraded turbos or single turbo kits, providing absolutely the best cooling capacity available in a high quality and high-value package. Includes an internal hot side flow diverter to ensure consistent flow and cooling throughout even at lower boost pressures. RACE requires minor trimming of the plastic shrouding during installation.
E chassis race FMIC dimensions 7.5" deep x 5.5" x 3" Overall height is 11"
Features and Benefits
- High-flow oversized design
- Larger end tanks
- Larger core size
- Prevents heat soak
- Direct bolt-on factory replacement
E Chassis Intercooler Vehicle Fitment
2010+ models, please see the bottom of the page for the "J-pipe"
BMW 1 Series
• 2007-2010 N54 BMW E82 E87 E88 135i
• 2011 N54 BMW E82 1M
• 2011+ N55 BMW E82 E87 E88 135i
BMW 3 Series
• 2007-2010 N54 BMW E90 E91 335i/335ix
• 2011-2013 N54 E92 335is
• 2011 N55 BMW E90 335i/335ix
• 2011-2013 N55 BMW E92 E93 335i/iX
BMW 5 Series
Requires adapter brackets (Sold Separately)
https://palenonperformance.com/products/535-e-chassis-n54-bmw-intercooler-adapter-brackets
• 2008-2010 E60 Sedan 535i/535ix
• 2008-2010 E61 Touring 535i/535ix
INSTALL VIDEO
DYNO RESULTS
OTHER PHOTOS
RACE Intercooler hot side flow diverter valve to ensure equal distribution through the large core at lower engine speeds
BMS High-Density Core Close Up
Optional E Chassis RACE Intercooler J Pipe (Sold Separately)
The factory J pipe is ~2.4" and in some 2010+ models a one-piece design. The 2.5" J pipe is suggested for models that have the one-piece design while the 3" J pipe allows you to stay 3" all the way from the intercooler to your throttle body when equipped with a 3" BMS charge pipe for the highest flow potential. We suggest the 3" J pipe for vehicles with aftermarket turbos.
Click here to purchase: https://palenonperformance.com/collections/burger-tuning/products/bms-race-intercooler-j-pipe
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need proof of purchase.
To start a return, you can contact us at palenonracing@gmail.com. If your return is accepted, we’ll send you instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
You can always contact us for any return question at palenonracing@gmail.com.
Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.
Exceptions / non-returnable items
Certain types of items cannot be returned, Burger Motorsports does not allow returns, custom products (such as special orders or personalized items), JB4 Tuners and air filters can not be returned. We also do not accept returns for hazardous materials, flammable liquids, or gases. Please get in touch if you have questions or concerns about your specific item.
Unfortunately, we cannot accept returns on sale items or gift cards.
Exchanges
The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.
Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. Certain circumstances will require a restocking fee of up to 25% at the discretion of Palenon Performance. (Examples of these circumstances include but are not limited to multiple failed delivery attempts, modified or damaged products and packaging, etc.) If approved, you’ll be automatically refunded on your original payment method. Please remember it can take some time for your bank or credit card company to process and post the refund too.
Handling
If the item is shipping from us direct, you will receive a tracking number within 1 business day. Most orders fulfilled at our warehouse will ship the same business day if ordered by 12pm MST. If the item is being drop shipped from the manufacturer, we cannot guarantee a tracking number within 1 business day. If an item is being drop shipped, we cannot guarantee the 24 hour (1 business day) processing time. A purchase of expedited shipping at checkout means that once item is ready to ship, it will ship using the upgraded shipping method. Some manufacturers require 3-5 days to process orders. Purchasing expedited shipping may speed up the processing time of your order, but we cannot make any guarantees in relation to faster processing time on the manufacturer’s end.
Cancellations
If you used a credit/debit card or PayPal to place an order and decide to cancel or return your order for any reason, a 5% merchant fee will be passed along to you (8% for Shop Pay installments). Some manufacturers can take up to 7 business days to ship out orders. If an item is out of stock we will reach out to you within 48 hours to confirm you would like to proceed with a preorder. If the item is listed as custom-built/ built to order within the description, or if the ETA or average lead time is visible on the product page at the time of ordering and you are cancelling inside of that ETA/lead time you will be charged the merchant fee. If the cancellation is outside of the time frame the merchant fee will not be charged to you for canceling.
