- Description
- Reviews
- Shipping and Refund
Fuel-It! CANfuel allows your ECU to control up to 8 fuel injectors sequentially in addition to an ethanol content sensor, low fuel pressure sensor, extra pressure sensors, EGT probes, external fuel pumps, and much more. All using the same CANbus technology your ECU already uses to communicate with factory control modules!
We’ve redesigned sequential port injection control from the ground up for an easier install, safer operation, and maximum flexibility. With an industry-leading 8 analog inputs, including 5v and signal ground references built in, you'll never run out of sensor I/O. For maximum flexibility we also include 5 analog outputs perfect for running external gauges, signal clamps, and more. And CANfuel even includes onboard Bluetooth for use with our free Android/iOS app!
A lot of engineering time has gone into the CANfuel design to set it apart from the competition. For example should it ever fail to get or lose sync with the crankshaft its programmed to revert to batch fire safety mode ensuring your engine never skips a beat. And our high current PWM outputs are setup to source 12v allowing you to ground the other side of your solenoid, relay, etc, for simpler and more reliable wiring!
CANfuel is housed in a rugged weatherproof aluminium enclosure and includes a high quality plug and play harness system. Our G Chassis harness fits all G chassis automatic transmission vehicles, while our universal harness is suitable for all other BMW applications, including G chassis manual transmission, F chassis, and E chassis.
CANfuel has the following operational modes:
JB4 Slave Mode (available now): Those running a JB4 will use slave mode for seamless JB4 tuning integration. In this mode, the CANfuel box integrates with your JB4 allowing it to fully control all the new I/O including sequential fuel injection, ethanol sensor/fuel pressure inputs, external boost solenoids, monitor injection status, and more, right from the JB4 app. The JB4 PI algorithm is configured to accommodate tip-in, auto-tuning based on various ethanol mixtures, low fuel pressure scaling, and much more. In addition, with unlocked ECUs, we provide free unlocked MHD backend flash maps that allow for real-time ECU scaling based on port injection volume and ethanol mixture on the fly. All without having to pay for expensive custom flash tuning!
Stand Alone Operation (coming soon!): In this mode, CANfuel operates independently allowing direct port injection mapping using our free CANfuel Bluetooth app. Featuring a 32x32 primary injection table with modifiers for ethanol mixture, fuel pressure, tip-in, EGT, full external solenoid boost PID control, and much more. And our free app allows real-time tuning adjustment!
ECU Slave Mode (coming soon!): In this mode, CANfuel fully integrates with your custom MHD-tuned ECU, similar to JB4 Slave mode, allowing the ECU to fully control port injection, external boost solenoids, read external inputs, monitor injection status, and more.
CANfuel includes onboard Bluetooth and a free app. The app allows you to independently monitor and log all CANfuel I/O, injector current, and a variety of passive CANbus data being pulled in such as engine temperatures, gear, vehicle speed, and more. Useful for diagnostics or when operating in stand-alone mode. In addition the app lets you load free CANfuel firmware updates with new features and functions as we release them! All without having to struggle with a laptop.
CANfuel Specifications:
Outputs:
8x fuel injectors (sink) with real time injector current/status monitoring
4x high load digital PWM up to 2-4 amps (source) 30-100hz (external relays, external boost solenoid, line lock, extra fuel pumps, and more)
5x Analog out (sensor offsets and scaling, signal clamping, and more)
Inputs:
3x Digital In (crankshaft, camshaft, ethanol sensor, MAF, and more)
8x Analog In (boost, low fuel pressure, coolant pressure, exhaust back pressure, and more)
2x EGT probe
Additional:
4x 5v reference pins for powering external sensors
4x Signal ground connections for external sensors
Bluetooth (free app for Android & iOS)
USB (for old timers!)
Onboard memory for full background logging
Connector pinout:
CANfuel N54 JB4 Wiring Guide Install Guide - Click to download
CANfuel Sequential Port Fuel Injection Controller Install Guide
Handling
Orders shipped directly from our warehouse are usually processed the same business day if placed before 12 PM MST, and tracking details are provided within 1 business day.
For drop-shipped items, processing times may vary depending on the manufacturer, typically 3–5 business days. Tracking updates may take longer in such cases.
Expedited shipping applies only once the item is ready to ship.
Return
You have 30 days after receiving your order to request a return. Items must be unused, in original packaging, and include proof of purchase. Customers are responsible for covering the return shipping costs.
To start a return, email us at support@palenonperformance.com. Returns sent without approval will not be accepted.
You can request a return directly from your account by selecting the return option on your order page. Here is the URL: https://shopify.com/55092379855/account/orders
Non-returnable items:
- Burger Motorsports (BMS) products
- Used items
- Air Intakes
- Hazardous materials, flammable liquids, or gases
- Discounted items and gift cards other than "PALENON PERFORMANCE" brand
Exchanges
Return the item and place a new order once approved.
Refunds
Approved refunds are issued to the original payment method. A restocking fee is 20% will be applied. Processing time depends on your bank or payment provider. The original shipping cost will not be refunded.
Cancellations
Canceled orders are subject to a 5% merchant fee (8% for Shop Pay installments). Custom, specialized items or pre-order items canceled within their lead time are also subject to this fee. Will also incur a 10% restocking fee.
Damaged or incorrect items
Inspect your order upon arrival and contact us immediately for assistance. If the wrong part was ordered, customer covers return shipping.
Disputes / Chargebacks
Our legal team is fully prepared to take stringent action against you for filing a baseless claim and initiating a fraudulent chargeback. This will lead to civil or criminal proceedings, which would require you to engage with our attorneys in our jurisdiction.
It is crucial to understand that filing a false chargeback is a serious offense, punishable by substantial fines or imprisonment. Potential penalties for fraudulent chargebacks can include one to three years in prison and fines ranging from $1,000 to $10,000. We treat all chargebacks with the utmost seriousness, regardless of the amount, as this is classified as a felony.
We will compose all necessary information to send your account to a collections agency and request that you be served once our lawyers organize the evidence and file a case against you.
Fuel-It! CANfuel allows your ECU to control up to 8 fuel injectors sequentially in addition to an ethanol content sensor, low fuel pressure sensor, extra pressure sensors, EGT probes, external fuel pumps, and much more. All using the same CANbus technology your ECU already uses to communicate with factory control modules!
We’ve redesigned sequential port injection control from the ground up for an easier install, safer operation, and maximum flexibility. With an industry-leading 8 analog inputs, including 5v and signal ground references built in, you'll never run out of sensor I/O. For maximum flexibility we also include 5 analog outputs perfect for running external gauges, signal clamps, and more. And CANfuel even includes onboard Bluetooth for use with our free Android/iOS app!
A lot of engineering time has gone into the CANfuel design to set it apart from the competition. For example should it ever fail to get or lose sync with the crankshaft its programmed to revert to batch fire safety mode ensuring your engine never skips a beat. And our high current PWM outputs are setup to source 12v allowing you to ground the other side of your solenoid, relay, etc, for simpler and more reliable wiring!
CANfuel is housed in a rugged weatherproof aluminium enclosure and includes a high quality plug and play harness system. Our G Chassis harness fits all G chassis automatic transmission vehicles, while our universal harness is suitable for all other BMW applications, including G chassis manual transmission, F chassis, and E chassis.
CANfuel has the following operational modes:
JB4 Slave Mode (available now): Those running a JB4 will use slave mode for seamless JB4 tuning integration. In this mode, the CANfuel box integrates with your JB4 allowing it to fully control all the new I/O including sequential fuel injection, ethanol sensor/fuel pressure inputs, external boost solenoids, monitor injection status, and more, right from the JB4 app. The JB4 PI algorithm is configured to accommodate tip-in, auto-tuning based on various ethanol mixtures, low fuel pressure scaling, and much more. In addition, with unlocked ECUs, we provide free unlocked MHD backend flash maps that allow for real-time ECU scaling based on port injection volume and ethanol mixture on the fly. All without having to pay for expensive custom flash tuning!
Stand Alone Operation (coming soon!): In this mode, CANfuel operates independently allowing direct port injection mapping using our free CANfuel Bluetooth app. Featuring a 32x32 primary injection table with modifiers for ethanol mixture, fuel pressure, tip-in, EGT, full external solenoid boost PID control, and much more. And our free app allows real-time tuning adjustment!
ECU Slave Mode (coming soon!): In this mode, CANfuel fully integrates with your custom MHD-tuned ECU, similar to JB4 Slave mode, allowing the ECU to fully control port injection, external boost solenoids, read external inputs, monitor injection status, and more.
CANfuel includes onboard Bluetooth and a free app. The app allows you to independently monitor and log all CANfuel I/O, injector current, and a variety of passive CANbus data being pulled in such as engine temperatures, gear, vehicle speed, and more. Useful for diagnostics or when operating in stand-alone mode. In addition the app lets you load free CANfuel firmware updates with new features and functions as we release them! All without having to struggle with a laptop.
CANfuel Specifications:
Outputs:
8x fuel injectors (sink) with real time injector current/status monitoring
4x high load digital PWM up to 2-4 amps (source) 30-100hz (external relays, external boost solenoid, line lock, extra fuel pumps, and more)
5x Analog out (sensor offsets and scaling, signal clamping, and more)
Inputs:
3x Digital In (crankshaft, camshaft, ethanol sensor, MAF, and more)
8x Analog In (boost, low fuel pressure, coolant pressure, exhaust back pressure, and more)
2x EGT probe
Additional:
4x 5v reference pins for powering external sensors
4x Signal ground connections for external sensors
Bluetooth (free app for Android & iOS)
USB (for old timers!)
Onboard memory for full background logging
Connector pinout:
CANfuel N54 JB4 Wiring Guide Install Guide - Click to download
CANfuel Sequential Port Fuel Injection Controller Install Guide
Handling
Orders shipped directly from our warehouse are usually processed the same business day if placed before 12 PM MST, and tracking details are provided within 1 business day.
For drop-shipped items, processing times may vary depending on the manufacturer, typically 3–5 business days. Tracking updates may take longer in such cases.
Expedited shipping applies only once the item is ready to ship.
Return
You have 30 days after receiving your order to request a return. Items must be unused, in original packaging, and include proof of purchase. Customers are responsible for covering the return shipping costs.
To start a return, email us at support@palenonperformance.com. Returns sent without approval will not be accepted.
You can request a return directly from your account by selecting the return option on your order page. Here is the URL: https://shopify.com/55092379855/account/orders
Non-returnable items:
- Burger Motorsports (BMS) products
- Used items
- Air Intakes
- Hazardous materials, flammable liquids, or gases
- Discounted items and gift cards other than "PALENON PERFORMANCE" brand
Exchanges
Return the item and place a new order once approved.
Refunds
Approved refunds are issued to the original payment method. A restocking fee is 20% will be applied. Processing time depends on your bank or payment provider. The original shipping cost will not be refunded.
Cancellations
Canceled orders are subject to a 5% merchant fee (8% for Shop Pay installments). Custom, specialized items or pre-order items canceled within their lead time are also subject to this fee. Will also incur a 10% restocking fee.
Damaged or incorrect items
Inspect your order upon arrival and contact us immediately for assistance. If the wrong part was ordered, customer covers return shipping.
Disputes / Chargebacks
Our legal team is fully prepared to take stringent action against you for filing a baseless claim and initiating a fraudulent chargeback. This will lead to civil or criminal proceedings, which would require you to engage with our attorneys in our jurisdiction.
It is crucial to understand that filing a false chargeback is a serious offense, punishable by substantial fines or imprisonment. Potential penalties for fraudulent chargebacks can include one to three years in prison and fines ranging from $1,000 to $10,000. We treat all chargebacks with the utmost seriousness, regardless of the amount, as this is classified as a felony.
We will compose all necessary information to send your account to a collections agency and request that you be served once our lawyers organize the evidence and file a case against you.
