- Description
- Reviews
- Shipping and Refund
Make tremendous amounts of power on pump gas!
The Fuel-It! S58 BMW Port Injection Kit is the ultimate fueling solution for your S58 powered BMW. It adds six supplemental low-pressure fuel injectors allowing fueling of up to 1000+ whp using water/methanol blends.
This kit includes stainless steel BMS Elite braided lines. They feature an inner Teflon seal for leak-free operation, stainless steel braid, a black outer nylon mesh for abrasion resistance and a stealthy look. These lines not only look great they are also equipped with BMS Elite AN fittings and can withstand extreme pressure and temperature conditions.
The included Burger Motorsports DDP 5800 water/methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA.
The Burger Motorsports JB4 Port Injection Controller attaches to the JB4 allowing it to directly control both traditional port injection kits and WMI port injection kits.
Stealth Tank for G20 G22 & G80 M3 & G82 M4 BMW tucks neatly in the side pocket of your trunk!
This water/methanol injection (WMI) tank is a completely custom design that neatly hides away in the left side trunk cavity found in most G20 G22 & G80 M3 & G82 M4 BMW vehicles. The pump mounts directly to the back of the tank allowing for a quick, clean, and completely stealth installation. The bottom of the tank includes a rear sump allowing for consistent performance even as the tank drains. Includes 2-way vented black plastic cap and a compression pump feed fitting.
Features & Benefits
• Included tank leaves trunk completely clear for full use of space
• Super low profile design tucks neatly into the existing left side trunk cavity
• 3.5 Gallon (13.25 liters) capacity
• Available in transparent white for visually checking fluid levels and opaque black for a stealth appearance.
• DDP 5800 pump mounts directly to the tank (pump sold separately)
• Includes 2-way vented black plastic cap
• Optional upgraded blue billet lid with 1-way check valve
• Includes all mounting hardware
S58 Powered Vehicle Fitment:
BMW M3
• 2021-Present S58 G80 BMW M3
• 2021-Present S58 G80 BMW M3 Competition
BMW M4
• 2021-Present S58 G82 BMW M4 (requires modification for tank fitment)
• 2021-Present S58 G82 BMW M4 Competition (requires modification for tank fitment)
What's included:
- (1) Fuel-It! S58 Billet Fuel Rail
- (6) 550cc Fuel Injectors
- (1) 15' Stainless steel braided water/Methanol line with black nylon sheathing
- (1) BMS Water/Methanol Pump
- (4) Pump Screws - Phillips Passivated Stainless 10-32 Thread, 1-1/4" Long
- (1) -6AN ORB fitting
- (1) -6AN ORB plug
- (2) 1/8" NPT plugs
- (3) 14 x 1 Stainless steel screws to secure the rail to your manifold
- (1) Injector installation jig
- (1) 8 x 3/4" screw for the installation jig
- (1) 21/64 drill bit to open the factory injector bosses
- (1) Superlube®
- (1) BMS JB4 Port Injection Controller
- (7) Wire nuts
- (1) inline fuse holder
- (1) 12V Relay
- (1) 15' of red power wire
- (1) 15' of black power wire
3.5 Gallon Tank: What's included:
- (1) 3.5 Gallon Stealth Tank
- (1) 2-way vented black plastic filler cap
- (1) brass Compression Tube Fitting for 1/4" Tube OD x 1/4 NPT Male
- (1) 18" of 1/4" nylon meth line
- (2) Powder coated stainless lower bracket
- (2) Rubber lower bracket grommets
- (2) BMS custom bell washers
- (2) Stainless Steel Flanged Button Head Screws M6 x 1 mm Thread, 8 mm Long
- (1) Plastic upper bracket
- (2) Self Tapping upper bracket screws 1/4" Size, 1-1/2" Long
- (4) Pump Screws - Phillips Passivated Stainless 10-32 Thread, 1-1/4" Long
- (1) Billet 1/4 push male to -4AN male 90º (pump out)
- (1) 1/4 push male to female 90º (pump in)
- (1) Button Head Hex Drive Screw 18-8 Stainless M8 x 1.25 Thread Size, 15mm Long (bracket to chassis)
- (1) Nylon lock nut - M8 x 1.25 mm Thread, 9.5 mm High (bracket to chassis)
- (1) Button Head Hex Drive Screw Passivated 18-8 Stainless Steel, M10 x 1.50 mm Thread, 16mm Long (bracket to chassis)
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need proof of purchase.
To start a return, you can contact us at palenonracing@gmail.com. If your return is accepted, we’ll send you instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
You can always contact us for any return question at palenonracing@gmail.com.
Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.
Exceptions / non-returnable items
Certain types of items cannot be returned, Burger Motorsports does not allow returns, custom products (such as special orders or personalized items), JB4 Tuners and air filters can not be returned. We also do not accept returns for hazardous materials, flammable liquids, or gases. Please get in touch if you have questions or concerns about your specific item.
Unfortunately, we cannot accept returns on sale items or gift cards.
Exchanges
The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.
Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. Certain circumstances will require a restocking fee of up to 25% at the discretion of Palenon Performance. (Examples of these circumstances include but are not limited to multiple failed delivery attempts, modified or damaged products and packaging, etc.) If approved, you’ll be automatically refunded on your original payment method. Please remember it can take some time for your bank or credit card company to process and post the refund too.
Handling
If the item is shipping from us direct, you will receive a tracking number within 1 business day. Most orders fulfilled at our warehouse will ship the same business day if ordered by 12pm MST. If the item is being drop shipped from the manufacturer, we cannot guarantee a tracking number within 1 business day. If an item is being drop shipped, we cannot guarantee the 24 hour (1 business day) processing time. A purchase of expedited shipping at checkout means that once item is ready to ship, it will ship using the upgraded shipping method. Some manufacturers require 3-5 days to process orders. Purchasing expedited shipping may speed up the processing time of your order, but we cannot make any guarantees in relation to faster processing time on the manufacturer’s end.
Cancellations
If you used a credit/debit card or PayPal to place an order and decide to cancel or return your order for any reason, a 5% merchant fee will be passed along to you (8% for Shop Pay installments). Some manufacturers can take up to 7 business days to ship out orders. If an item is out of stock we will reach out to you within 48 hours to confirm you would like to proceed with a preorder. If the item is listed as custom-built/ built to order within the description, or if the ETA or average lead time is visible on the product page at the time of ordering and you are cancelling inside of that ETA/lead time you will be charged the merchant fee. If the cancellation is outside of the time frame the merchant fee will not be charged to you for canceling.
Make tremendous amounts of power on pump gas!
The Fuel-It! S58 BMW Port Injection Kit is the ultimate fueling solution for your S58 powered BMW. It adds six supplemental low-pressure fuel injectors allowing fueling of up to 1000+ whp using water/methanol blends.
This kit includes stainless steel BMS Elite braided lines. They feature an inner Teflon seal for leak-free operation, stainless steel braid, a black outer nylon mesh for abrasion resistance and a stealthy look. These lines not only look great they are also equipped with BMS Elite AN fittings and can withstand extreme pressure and temperature conditions.
The included Burger Motorsports DDP 5800 water/methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA.
The Burger Motorsports JB4 Port Injection Controller attaches to the JB4 allowing it to directly control both traditional port injection kits and WMI port injection kits.
Stealth Tank for G20 G22 & G80 M3 & G82 M4 BMW tucks neatly in the side pocket of your trunk!
This water/methanol injection (WMI) tank is a completely custom design that neatly hides away in the left side trunk cavity found in most G20 G22 & G80 M3 & G82 M4 BMW vehicles. The pump mounts directly to the back of the tank allowing for a quick, clean, and completely stealth installation. The bottom of the tank includes a rear sump allowing for consistent performance even as the tank drains. Includes 2-way vented black plastic cap and a compression pump feed fitting.
Features & Benefits
• Included tank leaves trunk completely clear for full use of space
• Super low profile design tucks neatly into the existing left side trunk cavity
• 3.5 Gallon (13.25 liters) capacity
• Available in transparent white for visually checking fluid levels and opaque black for a stealth appearance.
• DDP 5800 pump mounts directly to the tank (pump sold separately)
• Includes 2-way vented black plastic cap
• Optional upgraded blue billet lid with 1-way check valve
• Includes all mounting hardware
S58 Powered Vehicle Fitment:
BMW M3
• 2021-Present S58 G80 BMW M3
• 2021-Present S58 G80 BMW M3 Competition
BMW M4
• 2021-Present S58 G82 BMW M4 (requires modification for tank fitment)
• 2021-Present S58 G82 BMW M4 Competition (requires modification for tank fitment)
What's included:
- (1) Fuel-It! S58 Billet Fuel Rail
- (6) 550cc Fuel Injectors
- (1) 15' Stainless steel braided water/Methanol line with black nylon sheathing
- (1) BMS Water/Methanol Pump
- (4) Pump Screws - Phillips Passivated Stainless 10-32 Thread, 1-1/4" Long
- (1) -6AN ORB fitting
- (1) -6AN ORB plug
- (2) 1/8" NPT plugs
- (3) 14 x 1 Stainless steel screws to secure the rail to your manifold
- (1) Injector installation jig
- (1) 8 x 3/4" screw for the installation jig
- (1) 21/64 drill bit to open the factory injector bosses
- (1) Superlube®
- (1) BMS JB4 Port Injection Controller
- (7) Wire nuts
- (1) inline fuse holder
- (1) 12V Relay
- (1) 15' of red power wire
- (1) 15' of black power wire
3.5 Gallon Tank: What's included:
- (1) 3.5 Gallon Stealth Tank
- (1) 2-way vented black plastic filler cap
- (1) brass Compression Tube Fitting for 1/4" Tube OD x 1/4 NPT Male
- (1) 18" of 1/4" nylon meth line
- (2) Powder coated stainless lower bracket
- (2) Rubber lower bracket grommets
- (2) BMS custom bell washers
- (2) Stainless Steel Flanged Button Head Screws M6 x 1 mm Thread, 8 mm Long
- (1) Plastic upper bracket
- (2) Self Tapping upper bracket screws 1/4" Size, 1-1/2" Long
- (4) Pump Screws - Phillips Passivated Stainless 10-32 Thread, 1-1/4" Long
- (1) Billet 1/4 push male to -4AN male 90º (pump out)
- (1) 1/4 push male to female 90º (pump in)
- (1) Button Head Hex Drive Screw 18-8 Stainless M8 x 1.25 Thread Size, 15mm Long (bracket to chassis)
- (1) Nylon lock nut - M8 x 1.25 mm Thread, 9.5 mm High (bracket to chassis)
- (1) Button Head Hex Drive Screw Passivated 18-8 Stainless Steel, M10 x 1.50 mm Thread, 16mm Long (bracket to chassis)
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need proof of purchase.
To start a return, you can contact us at palenonracing@gmail.com. If your return is accepted, we’ll send you instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
You can always contact us for any return question at palenonracing@gmail.com.
Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.
Exceptions / non-returnable items
Certain types of items cannot be returned, Burger Motorsports does not allow returns, custom products (such as special orders or personalized items), JB4 Tuners and air filters can not be returned. We also do not accept returns for hazardous materials, flammable liquids, or gases. Please get in touch if you have questions or concerns about your specific item.
Unfortunately, we cannot accept returns on sale items or gift cards.
Exchanges
The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.
Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. Certain circumstances will require a restocking fee of up to 25% at the discretion of Palenon Performance. (Examples of these circumstances include but are not limited to multiple failed delivery attempts, modified or damaged products and packaging, etc.) If approved, you’ll be automatically refunded on your original payment method. Please remember it can take some time for your bank or credit card company to process and post the refund too.
Handling
If the item is shipping from us direct, you will receive a tracking number within 1 business day. Most orders fulfilled at our warehouse will ship the same business day if ordered by 12pm MST. If the item is being drop shipped from the manufacturer, we cannot guarantee a tracking number within 1 business day. If an item is being drop shipped, we cannot guarantee the 24 hour (1 business day) processing time. A purchase of expedited shipping at checkout means that once item is ready to ship, it will ship using the upgraded shipping method. Some manufacturers require 3-5 days to process orders. Purchasing expedited shipping may speed up the processing time of your order, but we cannot make any guarantees in relation to faster processing time on the manufacturer’s end.
Cancellations
If you used a credit/debit card or PayPal to place an order and decide to cancel or return your order for any reason, a 5% merchant fee will be passed along to you (8% for Shop Pay installments). Some manufacturers can take up to 7 business days to ship out orders. If an item is out of stock we will reach out to you within 48 hours to confirm you would like to proceed with a preorder. If the item is listed as custom-built/ built to order within the description, or if the ETA or average lead time is visible on the product page at the time of ordering and you are cancelling inside of that ETA/lead time you will be charged the merchant fee. If the cancellation is outside of the time frame the merchant fee will not be charged to you for canceling.
