ARM Motorsports

MK7 Bi-Cooler Piping Upgrade - ARM Motorsports

MK7 Bi-Cooler Piping Upgrade - ARM Motorsports
MK7 Bi-Cooler Piping Upgrade - ARM Motorsports
MK7 Bi-Cooler Piping Upgrade - ARM Motorsports
MK7 Bi-Cooler Piping Upgrade - ARM Motorsports
MK7 Bi-Cooler Piping Upgrade - ARM Motorsports
MK7 Bi-Cooler Piping Upgrade - ARM Motorsports
MK7 Bi-Cooler Piping Upgrade - ARM Motorsports
MK7 Bi-Cooler Piping Upgrade - ARM Motorsports
MK7 Bi-Cooler Piping Upgrade - ARM Motorsports
MK7 Bi-Cooler Piping Upgrade - ARM Motorsports
$237.99 In Stock Sold out
Add Charge Pipe Upgrade
Notify when available
  • Description
  • Shipping and Refund
  • Reviews

HIGHLIGHTS

• INCREASED COOLING
• IMPROVED IAT's

PROFILE

The ARM MK7 Bi-Cooler Piping Upgrade allows you to run the ARM MK7 FMIC with the OEM intercooler, or any upgraded OEM location intercooler that fits the OEM charge piping. The ARM MK7 Bi-Cooler Upgrade is the ultimate solution to boost the performance of your MK7's charge-air cooling system.  The ARM MK7 Bi-Cooler Upgrade features a unique dual-cooling setup that significantly improves the heat dissipation of your Gen 3 EA888, allowing for lower IAT's, higher power output and increased cooling efficiency.

ARM MK7 Bicooler Upgrade

Made from 6-Layer Steel Wire Reinforced Silicone, the ARM MK7 Bi-Cooler Piping Upgrade can handle over 50psi, and anything you can throw at it.  To secure the boost, the ARM Bi-Cooler Kit uses constant-tension T-Bolt clamps to prevent any loosening over time. 

MK7 Bicooler Upgrade

The ARM MK7 Bi-Cooler Piping Upgrade maintains a consistent 2.5" diameter throughout the entire system to maximize volume while maintaining charge-air velocity.  In testing we found the ARM Bi-Cooler Setup to be incredibly effective, pairing the ARM MK7 FMIC with just the OEM intercooler we were able to see IAT's around only 13 degrees above ambient


MK7 Bicooler Upgrade

IN THE BOX

• ARM MK7 Bi-Cooler Piping - Driver Side
• ARM MK7 Bi-Cooler Piping - Passenger Side
• ARM T-Bolt Clamps


FITMENT GUIDE

The ARM MK7 Bi-Cooler Piping Upgrade is designed to work specifically with the ARM MK7 FMIC.  Therefore the ARM MK7 FMIC is a requirement for fitting the ARM MK7 Bi-Cooler Upgrade successfully.

Make Model Submodel Engine
Audi 8V S3 Quattro 2.0T
Audi A3 8V FWD 1.8T
Audi A3 8V FWD 2.0T
Audi A3 8V Quattro 2.0T
Volkswagen Alltrack All 1.8T Gen3
Volkswagen Golf VII GTI 1.8T Gen3
Volkswagen Golf VII Hatchback 1.8T Gen3
Volkswagen Golf VII Sportwagen 1.8T Gen3
Volkswagen Jetta VII GLI Sedan 2.0L Gen3
Volkswagen Golf VII GTI 2.0T Gen3
Volkswagen Golf VII Hatchback 2.0T Gen3
Volkswagen Golf VII Facelift FWD 1.8T Gen3
Volkswagen Golf VII Facelift FWD 2.0T Gen3
Volkswagen Golf VII R 4Motion 2.0T Gen3
Volkswagen Golf VII R GTI 2.0T Gen3
Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3
Volkswagen Golf VII SportWagen Facelift 4Motion 1.8T Gen3
Volkswagen Golf VII SportWagen Facelift FWD 1.8T Gen3

We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.

To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need proof of purchase.

To start a return, you can contact us at palenonracing@gmail.com. If your return is accepted, we’ll send you instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.

You can always contact us for any return question at palenonracing@gmail.com.


Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.


Exceptions / non-returnable items
Certain types of items cannot be returned, Burger Motorsports does not allow returns, custom products (such as special orders or personalized items), and air filters can not be returned. We also do not accept returns for hazardous materials, flammable liquids, or gases. Please get in touch if you have questions or concerns about your specific item.

Unfortunately, we cannot accept returns on sale items or gift cards.


Exchanges
The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.


Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. Certain circumstances will require a restocking fee of up to 25% at the discretion of Palenon Performance. (Examples of these circumstances include but are not limited to multiple failed delivery attempts, modified or damaged products and packaging, etc.) If approved, you’ll be automatically refunded on your original payment method. Please remember it can take some time for your bank or credit card company to process and post the refund too.

Handling

If the item is shipping from us direct, you will receive a tracking number within 1 business day. Most orders fulfilled at our warehouse will ship the same business day if ordered by 12pm MST. If the item is being drop shipped from the manufacturer, we cannot guarantee a tracking number within 1 business day. If an item is being drop shipped, we cannot guarantee the 24 hour (1 business day) processing time. A purchase of expedited shipping at checkout means that once item is ready to ship, it will ship using the upgraded shipping method. Some manufacturers require 3-5 days to process orders. Purchasing expedited shipping may speed up the processing time of your order, but we cannot make any guarantees in relation to faster processing time on the manufacturer’s end.

Cancellations

If you used a credit/debit card or PayPal to place an order and decide to cancel or return your order for any reason, a 5% merchant fee will be passed along to you (8% for Shop Pay installments). Some manufacturers can take up to 7 business days to ship out orders. If an item is out of stock we will reach out to you within 48 hours to confirm you would like to proceed with a preorder. If the item is listed as custom-built/ built to order within the description, or if the ETA or average lead time is visible on the product page at the time of ordering and you are cancelling inside of that ETA/lead time you will be charged the merchant fee. If the cancellation is outside of the time frame the merchant fee will not be charged to you for canceling. 

Recently Viewed