- Description
- Reviews
- Shipping and Refund
HIGHLIGHTS
PROFILE
The ARM MK7 GTI/GOLF R Intake Kit was designed to increase airflow on your 2.0T by removing the stock intake restrictions. Upgrading to the ARM MK7 Intake allows your 2.0T to produce more power and torque throughout the RPM range, especially at higher RPM. The ARM MK7 Intake is ideal for tuned IS20, IS38, and upgraded turbo-equipped 2.0T's.
CONSTRUCTION
The ARM MK7 GTI / GOLF R Intake features a class-leading 4" inlet size at the air filter to maximize airflow for even the most demanding builds. The ARM intake tube is built as a single piece of 6-layer reinforced silicone for a seamless transition to the 2.75" stock turbo inlet or the ARM MK7 Turbo Inlet. The solid construction of the inlet tube allows it to maintain its geometry during the most aggressive driving.
Installation of the ARM MK7 GTI / Golf R Intake will open up the sound of your turbo and enhance the intake sounds of your 2.0T. You can expect to hear significantly increased volume of your turbo spool on acceleration, as well as a very audible venting of air when letting off the throttle.
Included with the ARM MK7 GTI / GOLF R Intake kit is our heat shield finished in textured black and designed to fit the factory air duct perfectly. This is ideal if you plan to run a modified factory air duct. The connecting pipe between the air filter and intake pipe is welded into the heat shield to allow for a seamless design, minimizing areas for engine bay heat to sneak past the heat shield, keeping the cool air and engine bay heat separated as much as possible. The connection pipe has a tap for the reinstallation of the factory vacuum line. The heat shield is complete with soft rubber trim around the upper edge to create a snug seal with the hood, minimizing exposure to engine bay heat.
The air filter in the ARM MK7 Intake Kit utilizes an inverted design to maximize surface area. Combining the inverted filter design with the massive 5.5" base gives you over 300 cubic inches of filter surface area.
The ARM MK7 Intake comes complete with an integrated SAI Filter which installs directly into the heat shield, allowing access to cooler air for the secondary air intake.
IN THE BOX
•ARM Dry Air FilterFITMENT GUIDE
Make | Model | Submodel | Engine |
---|---|---|---|
Audi | 8V S3 | Quattro | 2.0T |
Audi | A3 8V | FWD | 1.8T |
Audi | A3 8V | FWD | 2.0T |
Audi | A3 8V | Quattro | 2.0T |
Audi | MK3 TT (2014+) | Quattro | 2.0T |
Volkswagen | Alltrack | All | 1.8T Gen3 |
Volkswagen | Golf VII | Hatchback | 1.8T Gen3 |
Volkswagen | Golf VII | Sportwagen | 1.8T Gen3 |
Volkswagen | Golf VII | Hatchback | 2.0T Gen3 |
Volkswagen | Golf VII Facelift | FWD | 1.8T Gen3 |
Volkswagen | Golf VII Facelift | FWD | 2.0T Gen3 |
Volkswagen | Golf VII R | 4Motion | 2.0T Gen3 |
Volkswagen | Golf VII R Facelift | 4Motion | 2.0T Gen3 |
Volkswagen | Golf VII SportWagen Facelift | 4Motion | 1.8T Gen3 |
Volkswagen | Golf VII SportWagen Facelift | FWD | 1.8T Gen3 |
Volkswagen | Jetta VII | GLI | 2.0T Gen3 |
ARM MOTORSPORTS LIFETIME WARRANTY
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need proof of purchase.
To start a return, you can contact us at palenonracing@gmail.com. If your return is accepted, we’ll send you instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
You can always contact us for any return question at palenonracing@gmail.com.
Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.
Exceptions / non-returnable items
Certain types of items cannot be returned, Burger Motorsports does not allow returns, custom products (such as special orders or personalized items), JB4 Tuners and air filters can not be returned. We also do not accept returns for hazardous materials, flammable liquids, or gases. Please get in touch if you have questions or concerns about your specific item.
Unfortunately, we cannot accept returns on sale items or gift cards.
Exchanges
The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.
Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. Certain circumstances will require a restocking fee of up to 25% at the discretion of Palenon Performance. (Examples of these circumstances include but are not limited to multiple failed delivery attempts, modified or damaged products and packaging, etc.) If approved, you’ll be automatically refunded on your original payment method. Please remember it can take some time for your bank or credit card company to process and post the refund too.
Handling
If the item is shipping from us direct, you will receive a tracking number within 1 business day. Most orders fulfilled at our warehouse will ship the same business day if ordered by 12pm MST. If the item is being drop shipped from the manufacturer, we cannot guarantee a tracking number within 1 business day. If an item is being drop shipped, we cannot guarantee the 24 hour (1 business day) processing time. A purchase of expedited shipping at checkout means that once item is ready to ship, it will ship using the upgraded shipping method. Some manufacturers require 3-5 days to process orders. Purchasing expedited shipping may speed up the processing time of your order, but we cannot make any guarantees in relation to faster processing time on the manufacturer’s end.
Cancellations
If you used a credit/debit card or PayPal to place an order and decide to cancel or return your order for any reason, a 5% merchant fee will be passed along to you (8% for Shop Pay installments). Some manufacturers can take up to 7 business days to ship out orders. If an item is out of stock we will reach out to you within 48 hours to confirm you would like to proceed with a preorder. If the item is listed as custom-built/ built to order within the description, or if the ETA or average lead time is visible on the product page at the time of ordering and you are cancelling inside of that ETA/lead time you will be charged the merchant fee. If the cancellation is outside of the time frame the merchant fee will not be charged to you for canceling.
HIGHLIGHTS
PROFILE
The ARM MK7 GTI/GOLF R Intake Kit was designed to increase airflow on your 2.0T by removing the stock intake restrictions. Upgrading to the ARM MK7 Intake allows your 2.0T to produce more power and torque throughout the RPM range, especially at higher RPM. The ARM MK7 Intake is ideal for tuned IS20, IS38, and upgraded turbo-equipped 2.0T's.
CONSTRUCTION
The ARM MK7 GTI / GOLF R Intake features a class-leading 4" inlet size at the air filter to maximize airflow for even the most demanding builds. The ARM intake tube is built as a single piece of 6-layer reinforced silicone for a seamless transition to the 2.75" stock turbo inlet or the ARM MK7 Turbo Inlet. The solid construction of the inlet tube allows it to maintain its geometry during the most aggressive driving.
Installation of the ARM MK7 GTI / Golf R Intake will open up the sound of your turbo and enhance the intake sounds of your 2.0T. You can expect to hear significantly increased volume of your turbo spool on acceleration, as well as a very audible venting of air when letting off the throttle.
Included with the ARM MK7 GTI / GOLF R Intake kit is our heat shield finished in textured black and designed to fit the factory air duct perfectly. This is ideal if you plan to run a modified factory air duct. The connecting pipe between the air filter and intake pipe is welded into the heat shield to allow for a seamless design, minimizing areas for engine bay heat to sneak past the heat shield, keeping the cool air and engine bay heat separated as much as possible. The connection pipe has a tap for the reinstallation of the factory vacuum line. The heat shield is complete with soft rubber trim around the upper edge to create a snug seal with the hood, minimizing exposure to engine bay heat.
The air filter in the ARM MK7 Intake Kit utilizes an inverted design to maximize surface area. Combining the inverted filter design with the massive 5.5" base gives you over 300 cubic inches of filter surface area.
The ARM MK7 Intake comes complete with an integrated SAI Filter which installs directly into the heat shield, allowing access to cooler air for the secondary air intake.
IN THE BOX
•ARM Dry Air FilterFITMENT GUIDE
Make | Model | Submodel | Engine |
---|---|---|---|
Audi | 8V S3 | Quattro | 2.0T |
Audi | A3 8V | FWD | 1.8T |
Audi | A3 8V | FWD | 2.0T |
Audi | A3 8V | Quattro | 2.0T |
Audi | MK3 TT (2014+) | Quattro | 2.0T |
Volkswagen | Alltrack | All | 1.8T Gen3 |
Volkswagen | Golf VII | Hatchback | 1.8T Gen3 |
Volkswagen | Golf VII | Sportwagen | 1.8T Gen3 |
Volkswagen | Golf VII | Hatchback | 2.0T Gen3 |
Volkswagen | Golf VII Facelift | FWD | 1.8T Gen3 |
Volkswagen | Golf VII Facelift | FWD | 2.0T Gen3 |
Volkswagen | Golf VII R | 4Motion | 2.0T Gen3 |
Volkswagen | Golf VII R Facelift | 4Motion | 2.0T Gen3 |
Volkswagen | Golf VII SportWagen Facelift | 4Motion | 1.8T Gen3 |
Volkswagen | Golf VII SportWagen Facelift | FWD | 1.8T Gen3 |
Volkswagen | Jetta VII | GLI | 2.0T Gen3 |
ARM MOTORSPORTS LIFETIME WARRANTY
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need proof of purchase.
To start a return, you can contact us at palenonracing@gmail.com. If your return is accepted, we’ll send you instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
You can always contact us for any return question at palenonracing@gmail.com.
Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.
Exceptions / non-returnable items
Certain types of items cannot be returned, Burger Motorsports does not allow returns, custom products (such as special orders or personalized items), JB4 Tuners and air filters can not be returned. We also do not accept returns for hazardous materials, flammable liquids, or gases. Please get in touch if you have questions or concerns about your specific item.
Unfortunately, we cannot accept returns on sale items or gift cards.
Exchanges
The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.
Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. Certain circumstances will require a restocking fee of up to 25% at the discretion of Palenon Performance. (Examples of these circumstances include but are not limited to multiple failed delivery attempts, modified or damaged products and packaging, etc.) If approved, you’ll be automatically refunded on your original payment method. Please remember it can take some time for your bank or credit card company to process and post the refund too.
Handling
If the item is shipping from us direct, you will receive a tracking number within 1 business day. Most orders fulfilled at our warehouse will ship the same business day if ordered by 12pm MST. If the item is being drop shipped from the manufacturer, we cannot guarantee a tracking number within 1 business day. If an item is being drop shipped, we cannot guarantee the 24 hour (1 business day) processing time. A purchase of expedited shipping at checkout means that once item is ready to ship, it will ship using the upgraded shipping method. Some manufacturers require 3-5 days to process orders. Purchasing expedited shipping may speed up the processing time of your order, but we cannot make any guarantees in relation to faster processing time on the manufacturer’s end.
Cancellations
If you used a credit/debit card or PayPal to place an order and decide to cancel or return your order for any reason, a 5% merchant fee will be passed along to you (8% for Shop Pay installments). Some manufacturers can take up to 7 business days to ship out orders. If an item is out of stock we will reach out to you within 48 hours to confirm you would like to proceed with a preorder. If the item is listed as custom-built/ built to order within the description, or if the ETA or average lead time is visible on the product page at the time of ordering and you are cancelling inside of that ETA/lead time you will be charged the merchant fee. If the cancellation is outside of the time frame the merchant fee will not be charged to you for canceling.
Recently Viewed
Recommendation
$384.99
$397.00